Skip to content
Austin Air Conditioning Company (512) 318-9239
03

AC Installation in Austin, TX

Central AC system replacement and new installations across Austin-area homes.

A technician standing with arms folded in front of an open service van, coiled hoses and stocked shelves in the back of it

A replacement system and a first-time central air setup are both often called AC installation, but the hallway can show which job is needed. A home with a thermostat, return grille, supply vents, and an aging indoor cabinet usually needs existing equipment evaluated for replacement. A room addition, converted garage, or house without connected ductwork may need a new route for the air handler, refrigerant line set, and electrical disconnect. We handle both replacement installations and new AC setups in Austin, Rollingwood, West Lake Hills, and Lost Creek.

An AC installation starts with the equipment already in place, the room layout, and the path between the indoor and outdoor units. We look at the cabinet, drain connection, duct openings, breaker panel, and outdoor pad before matching a system to the home. Replacement work can sometimes wait long enough for a proper survey and equipment selection, but a unit that will not cool occupied rooms or is leaking water around the air handler should not be left running because heat and condensate can affect the home.

Warm air and rattling

“The AC is running but the house is still hot” is a common call when the thermostat is set correctly but the supply registers blow warm or weak air. Customers also report an outdoor unit that hums without the fan turning, a metal rattle from the cabinet, or a repeated clicking sound before the system shuts off. Water around the indoor unit, a musty smell from a closet air handler, and rooms that stay warmer than the hallway are other useful descriptions to give us.

Warm air, fan noise, water, and clicking can come from very different parts of the system, including the blower, drain, electrical components, ductwork, or the cooling equipment itself. A system near the end of its usable life can also show more than one symptom at once. We inspect the actual cabinet and outdoor unit before treating those phone descriptions as the same problem, since the needed work and the resulting scope can differ substantially.

Installation site survey

An AC installation site survey usually takes about 30 to 60 minutes in the home. We note the model plate on the existing condenser and air handler, measure the supply and return openings, inspect the filter rack, and check the location of the drain line and outdoor pad. We also examine the refrigerant line route, electrical disconnect, breaker capacity, attic or closet access, and available space around the indoor cabinet.

For a like-for-like replacement, the dedicated installation visit commonly includes removing the old indoor and outdoor equipment, setting the new cabinet and condenser, connecting the line set, drain, duct transitions, and electrical wiring, then commissioning the system. Many straightforward changeouts take four to eight hours, while duct alterations, a new line route, panel work, or equipment that must be ordered are scheduled separately. We can usually complete the survey and identify the installation scope during the first visit; work requiring ordered equipment, permit review, or larger duct modifications is booked after the required materials and access are confirmed.

Line sets and attic access

The refrigerant line set, attic access, and electrical disconnect are major parts of an AC installation scope. A usable existing line route can reduce wall opening and ceiling work, while a damaged, undersized, inaccessible, or incompatible line set may need replacement between the air handler and condenser. Tight attic framing, a high platform, limited closet clearance, and an outdoor unit location behind a gate can also add labor because the cabinet and condenser must be moved and connected safely.

Older equipment may reveal a drain connection, disconnect, breaker, or duct transition that does not suit the new system. An electrical component that cannot be reused, a line set that needs replacement, or equipment that must be ordered changes the materials and scheduling involved. Local permit or inspection sign-off, when required for the electrical or mechanical work, also affects the full installation plan.

Model plate and attic access

Before calling Austin Air Conditioning Company, check the model number on the data plate of the outdoor condenser or indoor air handler, where accessible. The plate is commonly mounted on the side of the outdoor cabinet or inside the air-handler panel, and a clear photo can help identify the existing equipment. Let us know which rooms are not cooling, whether the current system is still running, and whether the air handler is in an attic, garage, closet, or utility room. Access information matters when a ladder, gate, attic hatch, or narrow hallway is involved. Call (512) 318-9239 with the model plate and access location, especially if water is collecting near the air handler, because ongoing condensate can damage drywall, flooring, or ceiling material.

When we are open

Mon–Sun Open 24 hours

Next

Next: thermostat repair, or back to the home page.